Viavi T-BERD/MTS 2000 User Manual page 95

You can also use the direction keys
the trace
Above the trace is shown the 2-points loss measurement between the two cursors,
together with the distance between the two cursors.
The cursors data are displayed exclusively if the Cursor menu key is
active. If another key is active, the display shows help tooltips, differ-
ent according to the selected function.
When the cursor function is selected, the keys
Cursors information
The information related to cursors are displayed exclusively when the Cursor function is
selected (menu key
Above the trace are shown the co-ordinates of the points of intersection of the cursors
A and B with the trace, together with the distance between the two points.
Figure 44 Cursors information
NOTE
The cursors information are displayed in the report when the Cursor function
is selected (active key). If the cursors values must not be displayed in the
report, select another softkey than the Cursor one before performing the
report (softkey Trace or Zoom for example).
Chapter 5 Launching a reflectometry test and displaying results
selected).
User Manual
and to move the selected cursor along
and
The Cursor function is
not selected
The Cursor function is
selected
77000010208 Rev. 012
Results display
move the trace vertically.
75