Results Display; Smart Link View - Viavi T-BERD/MTS 2000 User Manual

Chapter 5 Launching a reflectometry test and displaying results

Results display

2 Click on one parameter configuration (white background) to modify it using the
edition or numeric keypad displayed:
–
–
–
–
NOTE
The file is saved automatically by default with the Job Id parameter.
Example: if the Job Id is defined with Test Fiber 1, the otdr filename will be
Test Fiber 1.sor.
3 Once the recording information are defined as wished, select the saving mode
wished:
–
–
Click on BACK
Results display
The traces acquired or recalled from a memory are displayed on the Results page.
According to the mode of acquisition (Expert OTDR or Smart Test), the results page
offers similar functions, but also different functions.
The Smart Test mode displays automatically the Smart Link view after an acquisition.

Smart Link view

Once the results trace is displayed, click on Trace / Smart Link menu key to select the
Smart Link view.
64
Fiber Id: click on the fiber name currently defined to display the edition
keypad and enter a new fiber name.
Fiber Number; click on the fiber number currently defined to display the
numeric keypad and enter a new fiber number.
Location A / Location B: click on the location name currently defined to
display the edition keypad and enter a new name.
Job Id: click on the Job description currently defined to display the edition
keypad and enter a new description.
Click on FILE ONLY
.sor format
Click on FILE + PDF
generate a pdf report of the results.
User Manual
to save exclusively the results trace to the
to save the results trace in a .sor file and to
to return to results trace without saving the results.
77000010208 Rev. 012