Cam Chain Tensioner Removal And Installation; Camshaft Installation - Honda XLR200R Service Manual

CAM CHAIN TENSIONER REMOVAL AND INSTALLATION
Removal
Remove starter motor (~16-7)
Remove cam chain tensioner socket bolt and sealing washer.
Remove cam chain tensioner and gasket.
Installation
Remove cam chain tensioner sealing screw and a-ring.
-Use screwdriver as shown on illustration.
-Turn screwdriver clockwise to insert tensioner rod fully into
tensioner body.
':"'Use screwqriver to install cam chain tensioner and
gasket
while in lock position.
Install sealing washer and cam chain tensioner socket bolt,
then tighten to specified torque.
Torque:1.2 kg-m
-Remove screwdriver, attach o-ring and sealing screw, then
tighten to specified torque.
Torque: 0.4 kg-m
Install starter motor ('" 16-7)
Camshaft Installation
Remove timing hole cap. crankshaft hole cap.
Align flywheel "T" mark to left crankcase cover notch.
7-8
CYLINDER HEAD, VALVE
Tensioner Socket Bolt
~:':'?:~,p;"
.
.,...-\\\,<,
~4j:' ~ ·;L). ~ ·~~~·~~
W
<,
@ \
• o(l!
Gasket
Rod
Screwdriver
(~~!~
Tensioner
Socket Bolt
liV
Sealing Washer Screwdriver
lOT"
mark