Maintenance and Care
5.5.1 Filling the solution tank
Fill the solution tank (Fig. 12/1) before
starting work or as necessary. Park the
vehicle on a level floor area.
Open the tank cap (Fig. 12/5) and fill the
solution tank up to the maximum mar-
king (1/1)(Fig. 12/2).
5.5.2 Emptying the solution tank
Park the machine so that the fill level
hose (Fig. 12/3) is above a drain in the
floor. Remove the fill level hose from
the holder and remove the cover.
36
5.5.3 Cleaning the fresh water filter
Check the solution filter (Fig. 12/4) wee-
kly and clean or replace it as necessary.
Only clean the solution filter
when the tank is empty.
1. Empty the solution tank (Fig. 12/1),
see paragraph 5.5.2.
2. Screw the filter cap off.
3. Remove the filter element in the filter
housing to clean it. Replace it with a
new one, if necessary.
4. Replace the filter element and filter
cap.