Measured Variables And Operating Menus For Amperometric Sensors; Reduced / Complete Operating Menu; Description Of All Amperometric Measured Variables - ProMinent DULCOMETER D1Cb Series Instructions For Assembly And Use

Measured Variables and Operating Menus for Amperometric Sensors

6 Measured Variables and Operating Menus for Amperometric
Sensors

6.1 Reduced / Complete Operating Menu

The DULCOMETER
®
(reduced / complete). All of the parameters of the control unit are preset and can be changed in the
complete operating menu.
The controller is delivered with a reduced operating menu. If adjustments are necessary, the param‐
eters can be changed by switching to the complete operating menu.
general setting
information
Fig. 26: Reduced / complete changeover

6.2 Description of All Amperometric Measured Variables

WARNING!
Danger of incorrect metering
This can result in hazardous incorrect metering
During initial commissioning, the measured variable and the measuring range of the sensor must
be set prior to calibration. Refer to
Measuring Range " on page 37
Measured variable
Chlorine, chlorine dioxide, ozone
Bromine
Oxygen
Peracetic acid
D1Cb allows settings to be made in two different comprehensive menus
Identcode:
D1CB xxxxxxxxxx
Vxxxxxxxxxx
Srnr: xxxxxxxxxxx
Ä Chapter 4.1.2 "Selection of the Measured Variable and
alarm relay
operating menu
Calib timer
wash timer
Default measuring range
2 ppm
10 ppm
20 ppm
2000 ppm
operating menu
_
reduced
_ english
5000
access c.:
A0088_GB
51