Permanent Display 2; Permanent Display 3 - ProMinent DULCOMETER D1Cb Series Instructions For Assembly And Use

5.4 Permanent Display 2

mea. val
feedfwd:
ctrlout:.
w = 5.0 ppm
Fig. 19: Permanent Display 2
The permanent display 2 shows all information
on the DULCOMETER
this time. Switch to other displays by pressing
or or .

5.5 Permanent Display 3

2.3
0.0
3
Fig. 20: Permanent Display 3
1. Current reading in plain text
2. Bar graph display shows the current reading
in relation to the lower and upper reading limits
3. Displays the upper and lower limit of the
display
Switch to other displays by pressing
.
2.3
0%
100%
A0095_GB
® D1Cb that is needed at
1
2
ppm
10.0
A0094
or
Operating Schematics / Display Symbols
To set the lower and upper value (3) press
The left-hand value will flash and can be set
using the or
. Switch between the left-hand and right-hand
value (3) by pressing
This setting only changes the display range of the
bar graph, as it were "zooming in" to a smaller
range to obtain a better resolution of the display
in the main display range of the measurement.
This setting only changes the display range
of the bar graph! It is not possible to change
the measured range of the
DULCOMETER
or
keys. Confirm the entry with
.
D1Cb with this function.
®
.
45