General Safety Information - ProMinent DULCOMETER D1Cb Series Instructions For Assembly And Use

Introduction
n
A technical expert is deemed to be a person
who is able to assess the tasks assigned to
him and recognise possible hazards based
on his/her technical training and experi‐
ence, as well as knowledge of pertinent
regulations.
Note: A technical qualification is typically
proven by the required completion of a tech‐
nical training course. The assessment of a
person's technical training can also be
based on several years of work in the rele‐
vant field.
n
A qualified employee is deemed to be a
person who is able to assess the tasks
assigned to him and recognise possible
hazards based on his/her technical
training, knowledge and experience, as well
as knowledge of pertinent regulations.
Note: The assessment of a person's tech‐
nical training can also be based on several
years of work in the relevant field.
n
An instructed person is deemed to be a
person who has been instructed and, if
required, trained in the tasks assigned to
him/her and possible dangers that could
result from improper behaviour, as well as
having been instructed in the required
protective equipment and protective meas‐
ures.
n
Customer service department refers to
service technicians, who have received
proven training and have been authorised
by ProMinent to work on the system.
Note for the system operator
The pertinent accident prevention regula‐
tions, as well as all other generally acknowl‐
edged safety regulations, must be adhered
to!
8

1.3 General Safety Information

WARNING!
Live parts!
Possible consequence: Fatal or very
serious injuries
–
Measure: Disconnect the mains power
supply prior to opening the housing
–
De-energise damaged, defective or
manipulated units by disconnecting the
mains plug
WARNING!
Unauthorised access!
Possible consequence: Fatal or very
serious injuries
–
Measure: Ensure that there can be no
unauthorised access to the unit
WARNING!
Operating errors!
Possible consequence: Fatal or very
serious injuries
–
The unit should only be operated by
adequately qualified and technically
expert personnel
–
Please also observe the operating
instructions for controllers and fittings
and any other component groups, such
as sensors, measuring water pumps ...
–
The operator is responsible for
ensuring that personnel are qualified