Reduced / Complete Operating Menu; Description Of Ph, Redox And Fluoride Measured Variables - ProMinent DULCOMETER D1Cb Series Instructions For Assembly And Use

Measured Variables and Operating Menus for Potentiometric Sensors

7.1 Reduced / Complete Operating Menu

The DULCOMETER ®
(reduced / complete). All of the parameters of the control unit are preset and can be changed in the
complete operating menu.
The controller is delivered with a reduced operating menu. If adjustments are necessary, the param‐
eters can be changed by switching to the complete operating menu.
general setting
information
Fig. 32: Reduced / complete changeover

7.2 Description of pH, Redox and Fluoride Measured Variables

WARNING!
Danger of incorrect metering
This can result in hazardous incorrect metering
During initial commissioning, the measured variable and the measuring range of the sensor must
be set prior to calibration. Refer to
Measuring Range " on page 37
pH Measured variable
Measuring range
Display range
Reference temperature
Resolution
D1Cb allows settings to be made in two different comprehensive menus
Identcode:
D1CB xxxxxxxxxx
Vxxxxxxxxxx
Srnr: xxxxxxxxxxx
Ä Chapter 4.1.2 "Selection of the Measured Variable and
alarm relay
operating menu
Calib timer
wash timer
Typical measuring range
- 500 mV ... + 500 mV
At least pH -1.45 ... 15.45
+25°C
0.01 pH
operating menu
_
reduced
_ english
5000
access c.:
A0088_GB
63