Activation Code For Extended Functions; Extended Functions Obtainable With The Activation Code - ProMinent DULCOMETER D1Cb Series Instructions For Assembly And Use

Commissioning

4.2 Activation Code for Extended Functions

Activation code
Access to further functions can optionally be provided by means of an activation code.
Should you require additional operating literature for these functions, this can be obtained on the
homepage of ProMinent Dosiertechnik, Heidelberg.
general setting
informationen
Fig. 16: Activation code / Serial number
The activation code is entered one digit at a time using the
with the key.
The newly activated functions must be configured or parameterised in the relevant menu or new
measured variables must be calibrated. Information on this can be found in the relevant complete
operating menu.
4.2.1 Extended Functions Obtain‐
able with the Activation Code
Extended functions
The DULCOMETER
®
extended or modified by means of a 16-digit acti‐
vation code. Functions can be enabled several
times.
38
Identcode:
D1CB xxxxxxxxx
Vxxxxxxxxxx
Srnr: xxxxxxxxxx
D1Cb control unit can be
wach timer
measure change
add. functions
software version
Code ok!
wrong code!
and key. Move to the next position
D1Cb software upgrade
To provide an activation code, ProMinent
requires the 10-digit serial number (Srnr)
and the required software upgrade ident‐
code, which can both be found in the table
below.
unlocking
function
yes no
Code input:
_ _ _ _ - _ _ _ _ -
_ _ _ _ - _ _ _ _
A0010_GB