Configuration With A Siemens Master - Festo CPX-FB13 Electronic Manual

2. Commissioning

2.1.4 Configuration with a Siemens master

GSD
Festo P.BE−CPX−FB13−EN en 0308a
Please note
Various configuration programs are available in conjunc
tion with a Siemens master. Note the relevant procedure
for your configuration program.
The following sections describe as an example the main con
figuration steps with the STEP 7 software. It is assumed that
the user is familiar with the contents of the manual for the
STEP 7 software.
Information on operation with general DP masters can be
found in appendix A.2.
STEP 7 HW Config (up to V 5.2)
Preparations
1. Copy the GSD of the valve terminal into directory
...\STEP7\S7DATA\GSD on your programmer/PC.
File: CPX_059E.GS*
(reference sources for the GSD see section 2.1.3)
You can either:
copy the GSD manually into the above−named direc
tory (e.g. via Windows Explorer) or
load it via the menu [Options] [Install new GSD].
Please note
Update the Hardware Catalogue when you copy the GSD
during your work with STEP 7.
Menu in HW Config: [Options] [Update catalogue]
2−15