Installing The Eds File (Recommended Variant) - Festo VIFB11-02 Series Manual

VIFB11 - 02
5-38
5. Commisioning
The following possibilities are available for
extending the EDS library:

– installing the EDS file (recommended variant)

– reading out EDS information in online mode
(see manual for the DeviceNet Manager)
– entering the slaves manually (see manual for
the DeviceNet Manager and Appendix B.2 in
this manual).
Installing the EDS file (recommended variant)
For extending the EDS library, a CD-ROM is
provided with this manual. This CD-ROM
contains suggestions for two EDS files as well
as icons/bitmaps for valve terminal type 02. In
order to install an EDS file, proceed as follows:
1. Activate the command Install EDS Files in the
menu Utilities .
2. Place the CD-ROM (part number 384676,
version 9904b or later) in your CD-ROM
drive and switch to the appropriate drive.
Select the sub-directory "DeviceNet" .
The file Readme.txt in the main directory of
the CD-ROM contains information on the
directory structure of the CD-ROM.
9902d