Status; Esc Rs A N; Esc Ack Soh - Star StarPRNT SM-L Series Command Specifications

2.3.20. Status

ESC RS a n

[Name] Set status transmission conditions
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] 0≤n≤3, 48≤n≤51("0"≤n≤"3")
n=16,n=255
[Initial Value] Set by DIP switches and memory switches.
[Function] Sets the status transmission conditions.
See Appendix 2 for details regarding ASB status.
Settings of this command are unaffected by the ESC @ command.
See each printer's product specifications manual for details on the DIP SW and memory switch settings.
The command functions can be selected using the memory switch.
Therefore, the command specifications vary depending on the memory switch setting as follows.
n
0, 48
1, 49
2, 50
3, 51
16
255

ESC ACK SOH

[Name] Real-time printer status (ASB status)
[Code] ASCII ESC
Hex. 1B
Decimal 27
[Defined Area] - - -
[Initial Value] - - -
[Function] Sends ASB status information to the host.
This command is not used when ASB is valid.
See Appendix 2, Automatic Status for details regarding ASB status.
Star PRNT Command Specifications
RS a n
1E 61 n
30 97 n
Command function selection by memory switches
Status transmission conditions
ASB Invalid • NSB Invalid
ASB Valid • NSB Invalid
ASB Invalid • NSB Valid
ASB Valid • NSB Valid
Returns the ASB and NSB settings to the initial state
previously set by the DIP SW or MSW.
Sends the ASB status information.
ACK SOH
06 01
6 1
Status transmission
Status transmission
2-83