System Maintenance; Daily Maintenance; Cleaning The System - Mindray DC-40 Operator's Manual

Diagnostic ultrasound system
Hide thumbs Also See for DC-40:
Table of Contents

Advertisement

16

System Maintenance

Routine system maintenance shall be carried out by the user. System maintenance after
the warranty has expired is the full responsibility of the owner/operator.
The responsibility for maintenance and management of the product after delivery resides
with the customer who has purchased the product.
If you have any questions, please contact Mindray Customer Service Department or
sales representative.
WARNING:

16.1 Daily Maintenance

You are responsible for daily maintenance.

16.1.1 Cleaning the System

WARNING:
Do not spill water or other liquid into the system while you
CAUTION:
perform the cleaning. Otherwise it may result in malfunction or
electric shock.
1. DO NOT use hydrocarbon glass cleaner or cleaner for OA (Office
NOTE:
Automation) equipment to clean the monitor. These substances may cause
deterioration of the monitor.
2. Please clean the control panel periodically, otherwise the button may be
blocked by dirt and the system will be buzzing while the button makes no
response.
1. Only an authorized Mindray service engineer can
perform maintenance not specified in this operator's
manual.
2. For the sake of the system performance and safety, you
should perform periodical checks for the system.
1. Before cleaning the system, be sure to turn off the power
and disconnect the power cord from the outlet. If you
clean the system while the power is "On", it may result in
electric shock.
2. DO NOT directly spray solution onto the monitor, system
control panel or hard surfaces that is under pressure or
pumped. Ingress fluid leakage into the monitor or system
can damage the monitor or system, causing possible
electric shock or system failure.
System Maintenance 16-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc-35Dc-40sDc-45Dc-40 pro

Table of Contents