Moving Comments; Modifying (Editing) Comments - Mindray DC-40 Operator's Manual

Tracing
(3) In comment status, tap [Trace] on the touch screen to activate the trace function.
The current image is also displayed on the touch screen.
(4) Control Panel operation:
d) Roll the trackball to the desired position and press <Set> to confirm the start
point.
e) Roll the trackball to move the cursor along the edge of the desired region
and trace the outline of the region.
Rotate the <Angle> knob counter-clockwise to cancel 1 pixel of trace.
Rotate the <Angle> knob clockwise to restore 1 pixel of trace.
Short press <Clear> to clear last trace. Long press <Clear> to delete all
tracing.
f) Press <Set> to finish tracing.
Touch screen operation:
d) Trace around the ROI by touching the touch screen image with your finger.
e) Remove your finger to finish tracing.
[Clear]: touch to delete traces in reverse order one by one.
[Clear All]: touch to delete all traces.
f) Click [Exit] to exit tracing.
9.1.4

Moving Comments

1. Move the cursor onto the comment that needs to be moved. Press <Set> to select it,
and a highlighted box appears around the comment.
2. Roll the trackball to move the comment to the new position.
3. Press the <Set> key to anchor the comment in the new position, and the comment-
moving operation is complete.
9.1.5

Modifying (Editing) Comments

Modifying (Editing) characters
1. In comment status, move the cursor over the comments to be modified.
Press the alphabetic keys to enter the character at the cursor position.
Or, double press <Set> to enter comment editing status and use the direction
keys to move the cursor to the desired location to insert/delete characters. Either
type characters by pressing the corresponding keys or select the new comment
text from the menu.
2. Press <Del.> to delete the comment character or text on the right side of the cursor.
Press <Backspace> to delete the comment character or text on the left side of the
cursor.
3. Roll the trackball or press <Set> to confirm the modification and exit the edit status.
The comment turns to yellow.
If there are already comments on the screen, press the space bar to enter editing
status.
Modifying (Editing) Arrows
1. Move the cursor over the arrow that needs to be modified. After the cursor turns to
, press the <Set> key. The current arrow turns green, and there is a green frame
Comments and Body Marks 9-5