Table of Contents
Advertisement
Tips: Usualy the DHCP is selected. If you select Static, please refer to 12.5.1 Local
TCP/IP to set IP Adres, Subnet Mask and Gateway.
4. Select the desired hotspot from the [Wireless Network Manager].
The data display in the [Network SSID] and [Security] control. If the hotspot wanted is
not in the list, you can input the data manually in the controls and click [Connect].
When connecting an encrypted network, enter the password in the box on the left
first.
5. If the connection is successful, the
the screen.
6. If the user wants to disconnect the WiFi. Choose the selected address from Wireless
Network Manager, and click [Disconnect] to disconnect the WiFi. The selected WiFi
is disabled.
NOTE: 1. You can refresh the W-LAN network by switching the current adapter.
2. If the IP address displays as 0.0.0.0, this means that the network is
abnormal, the reason may be failure disconnection or the system cannot
obtain IP address.
3.
IF the WiFi module is not installed, the network manager icon appears
and reminds of the failure of the WiFi network connection. The icon
disappears soon.
12.5.2 iStorage
Enter [Preset] [Network Preset] [iStorage].
Name
Service Name
12-12 Setup
Name of the device, cannot be empty
will be displayed on the lower right corner of
Description
,
Advertisement
Table of Contents
