Table of Contents
Advertisement
(2) Select the user name in the drop-down list of User Name.
(3) Enter password and click [Login].
To change user:
(1) To log out the current user and change to another user, click
corner of the screen to pop up the following dialogue box:
(2) Click [Change User] to pop up the Login dialogue box.
(3) Enter the user name and password in the field box.
NOTE: You have to exit the Preset screen before changing the user.
10.9.4 Adding/Deleting a User
The system administrator can add and delete a user, while the operator can't.
Add a User
Premise: you must log on the system as the system administrator. If not, you will be
required to enter administrator name and password before the setting.
1. Open the "Admin" page through the path: [Setup] [System Preset] [Admin].
2. Click [Add] to pop up the following dialogue box.
3. Enter user name.
4. Enter the password and the confirmed password.
5. Set the user role in the drop-down list: administrator or operator.
at the lower right
Patient Data Management 10-17
Advertisement
Table of Contents
