Table of Contents
Advertisement
Display/Hide the M-mark Line
Description There are 3 M-mark lines available, each with "A", "B" or "C" at the one
end as identification and an arrow at the other end to mark the direction.
Perform the selection using the [Show A], [Show B] or [Show C] item on
M-mark
the touch screen, and the corresponding image will be displayed on the
Line
screen once the related item is selected.
Selection
Tap [Display Cur.] or [Display All] on the touch screen to select whether to
Display
display the image of the current M-mark line or all.
current
When there is only one M-mark line on the screen, it cannot be hidden.
Impacts
Switching between the M-mark Lines
Description To switch between the M-mark lines in Free Xros M mode.
Press <Set> to switch between the M-mark lines and press <Cursor> to
Operations
show the cursor.
The activated M-mark line will be green and the inactivated one will be
white.
Adjusting the M-mark Line
Description To adjust the position and angle of the M-mark line.
Operations
When the M-mark line is activated, move the trackball left and right to
adjust the position. The direction is recognized by the arrow at the end of
the line.
When the M-mark line is activated, move the trackball to adjust the fulcrum
of the line, and adjust using the [Angle/Steer] key on the control panel.
The adjusting angle range is 0-360°, in increments of 1°.
5.8.1.3
Exit Free Xros M
In Free Xros M mode, tap [Free Xros M] or press B or the user-defined Free Xros M key
to exit Free Xros M mode.
5.8.2
Free Xros CM (Curved Anatomical M-Mode)
CAUTION:
In Free Xros CM mode, the distance/time curve is generated from the sample line
manually depicted anywhere on the image. Free Xros CM mode can be entered using
TVI and TEI modes.
Position Adjustment
Angle Adjustment
Free Xros CM images are provided for reference only, not for
confirming diagnoses. Compare the image with those of other
machines, or make diagnoses using non-ultrasound methods.
Image Optimization 5-29
Advertisement
Table of Contents
