Mindray DC-40 Operator's Manual page 164

Diagnostic ultrasound system
Hide thumbs Also See for DC-40:
Table of Contents

Advertisement

b) Rotate the multifunctional knob to view the comments one by one
c) Press the knob again to add the selected item onto the image (comment
added in an editable state)
d) Rotate the multifunctional knob to search for the next part, and press the
knob again to add the second part of the combined comment.
e) Repeat procedures to add other parts of a combined comment.
f) Press <Set> to complete the comment.
Adding an arrow
You can add an arrow to a location where you want to pay attention.
(1) Press <F12> (Arrow) key, and an arrow will appear at the default position.
(2) Adjust the arrow
Adjust the position and orientation of the arrow: roll the trackball to the
desired position and use the multifunctional knob to change the orientation
in 15° increments.
Click the [Arrow Size] item on the soft menu to change the arrow size.
(3) Press <Set> or <Enter> to anchor the arrow position, and then the arrow turns
yellow.
(4) Repeat the above steps to add more arrows if necessary.
(5) Press <F12> (Arrow) key, <Esc> or to exit the arrow comment status.
9-4 Comments and Body Marks

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc-35Dc-40sDc-45Dc-40 pro

Table of Contents