Table of Contents
Advertisement
Content
Description
First wipe off dust or stain attached to the cover of printer with soft dry
Color and B/W
cloth, then clean the inside of printer. Be sure to do the cleaning
video printer
maintenance according to the operation manual if is necessary.
First wipe off dust or stain attached to the cover of printer with soft dry
Graph / text
cloth, then clean the inside of printer. Be sure to do the cleaning
printer
maintenance according to the operation manual if is necessary.
Use soft dry cloth with a little mild soap water to wipe off the dust or
Footswitch
stain attached to the pedals or cable of foot switch.
First use soft dry cloth to wipe off dust attached to glass panel of
Bar code
scanner, then the dust or strain attached to cable and bracket. Be sure
scanner
to do the especial cleaning maintenance according to the operation
manual if is necessary.
16.1.3 Checking the Probe
Visually check to confirm that there is no crack and expansion to probe head.
Visually check to confirm that there is no deterioration or desquamation to probe
cable.
Visually check to confirm that there is no bend, destroyed or falling off pins to the
connector.
16.1.4 Checking the Power Cable and Plug
Visually check to confirm that there is no wrinkles, crack or deterioration; No crack
and expansion to the surface of adapter.
Manually check to confirm that there is no looseness or rupture. The connection of
plug is reliable.
16.1.5 Checking Appearance
Check if there is any crack in the covers:
Ultrasound system covers
Probe appearance
16.1.6 Backup of the System Hard Drive
To prevent deterioration or loss of data stored in the system hard drive, create a backup
copy of the hard drive at regular intervals.
System Maintenance 16-5
Advertisement
Table of Contents
