Image Preset - Mindray DC-40 Operator's Manual

Type
Brightness/Contrast
Load Factory
Screen
Screen Saver
Saver

12.1.3 Image Preset

Open the page via [Setup]
Type
Reset
Probe
Config
Freeze
Status after Freeze
Config
Steer
Image
Auto Invert
Item
To set if use the factory setting values of brightness
and contrast.
To select a system dormancy type.
After screen saver function is enabled, click
[Browse] to select the figure used for screen saver,
and click [Preview] to see the effect.
To set the waiting time before the system enters
dormancy/standby status in the drop-down list
beside "Wait".
[System Preset]
Item
To set the default probe model for the system.
To set the system status after image is frozen.
To set the steer mode in B+ Color +PW imaging
mode.
C&PW: select to adjust the sample volume in
color mode and sample line in PW mode together.
C/PW: select to adjust the sample volume in color
mode and sample line in PW mode individually.
The spectrum can automatically invert when the
color flow is steered to a certain angle, thus
accommodating operator's habit of distinguishing
flow direction.
Description
[Image].
Description
Setup 12-5