Table of Contents
Advertisement
Page-turning
If there is more than one page of body marks, rotate the knob under [Page] to turn
the pages.
User-defined body mark
Tap [Custom] to enter the dialog. You can import body mark graphs here.
You can import a user-defined body mark in BMP/PNG format of 120*120 (unit: pixel)
in size.
Save Probe
If the probe mark direction and position is determined for the current body mark
being added, tap [Save Probe] to save the current probe mark direction and position
for the body mark.
9.2.2
Adding Body Marks
1. Enter Body Mark status. Use the knob under [Library] to select the body mark
category.
2. Adding Body Marks:
Adding body marks using the trackball and <Set> key.
Move the cursor over the desired body mark to highlight your choice. Press
<Set> to add the body mark.
Adding body marks using the touch screen.
Touch the desired body mark on the touch screen directly.
3. To adjust the probe position and orientation marker:
Roll the trackball to position the probe marker.
Rotate the <Angle/Steer> knob to adjust the orientation.
Tap [Save Probe] to save the current probe mark direction and position for the
body mark.
4. Press <Set> to confirm the position and orientation of the probe marker and exit
body mark mode.
9.2.3
Moving Body Marks
You can move the body mark graphics to any desired position within the image area.
1. Roll the trackball to move the cursor onto the body mark. The cursor changes into
, indicating you can move the pictogram to a new position.
2. Press <Set> key to select the body mark, and a frame will appear around the
graphics.
3. Roll the trackball to move the body mark to the desired position.
4. Press <Set> to anchor and confirm the new graphics position.
NOTE: In Dual B Mode, a body mark cannot be moved between the separated image
windows.
9.2.4
Deleting Body Marks
To delete a body mark
(1) Use the trackball to position the cursor on the body mark graphic and Press <Set>
to select.
Comments and Body Marks 9-7
Advertisement
Table of Contents
