Pw/Cw Mode Image Parameters - Mindray DC-40 Operator's Manual

5.6.2

PW/CW Mode Image Parameters

In PW/CW mode scanning, the image parameter area in the top-right corner of the
screen displays the real-time parameter values as follows:
PW Parameter F
Meaning Frequency
CW Parameter F
Meaning Frequency
During PW/CW mode imaging, the image optimizing menus for B mode and PW/CW
mode are displayed on the touch screen at the same time. If Color mode (Power
mode) is also working, menus for certain modes will be displayed on the touch
screen synchronously, and you can switch between them by clicking the mode tabs.
When you adjust the depth of the B mode image, related changes will occur in the
PW/CW mode image as well.
Most of the parameters are the same for the PW mode and CW modes, so
parameters of both are combined together to be introduced here.
Only phased probes support CW mode.
G PRF WF
Gain PRF Wall
Filter
G PRF WF
Gain PRF Wall Filter
SVD SV
SV SV Size
Position
SVD
SV Position
Image Optimization 5-21
Angle
Angle
Angle
Angle