Table of Contents
Advertisement
5.10.7.2 iPage Basic Functions and Operations
<1>
A plane
<4>
Y-axis
<7>
Section line
<10>
Wire cage
<13>
Central plane mark
Layout
The system supports several types of display layout: 2*2, 3*3, 4*4 and 5*5. Tap the
corresponding icon on the touch screen to select, and the selection [Slice Number]
changes accordingly.
Reference image
Tap [A], [B] or [C] to select the reference image.
Slice and slice line
Central slice: the central plane which corresponds to the central slice line is the
central slice, marked with a green "*" in the top-left corner of the image.
Tap
slice lines horizontally.
Active slice: the central plane which corresponds to the green slice line is the
active slice, marked with a green box. The default active slice is the central slice.
<2>
B plane (the current
reference image)
<5>
X-axis
<8>
Space between two
planes
<11>
Section plane order
number
<14>
Green box on the active image
to position the slice lines vertically, and tap
<3>
C plane
<6>
Central section line (Current
active section line)
<9>
Image parameter
<12>
Section plane position (to the
central plane)
to position the
Image Optimization 5-59
Advertisement
Table of Contents
