Table of Contents
Advertisement
1
2
3
1. Printer room window
Color analog video printer: use the I/O panel at the rear side of the machine to
connect the printer, as shown in the following figure:
4. Load a paper roll, and turn on the system and printer.
5. Modify print service:
Add a print service:
(1) Open the [Setup] [Print Preset] [Print Service].
(2) Click [Add Service] to enter the page.
(3) Select the service type and enter the service name manually.
(4) Click [OK] to return to the Printer Service page.
(5) Select the printer model, and then you can set the properties in the Property box.
(6) Click [OK] to complete the setting.
Modify print service:
(1) Select an existed printer service in the list.
(2) Select the printer model, and then you can set the properties in the Property box.
(3) Click [OK] to complete the setting.
2. Printer 3. Room cover
Connect to
S-Video out
cable
Connect the
remote cable
of the printer
System Preparation 3-15
Advertisement
Table of Contents
