Type
Cine Memory
iScape Ruler Display
12.1.4 Application
Open the page via [Setup]
set the measure ruler and relevant information. For details, please refer to the Operator's
Manual [Advanced Volume].
12.1.5 OB Preset
Open the page via "[Setup]
the gestational age formula, fetal growth formula, fetal weight formula and the relevant
information. For details, please refer to the Operator's Manual [Advanced Volume].
12.1.6 Key Configuration
Open the page via "[Setup]
Key function setting
You can set the functions for <Print>, <Save>, F3, F4, F5, F6, F9 and P1.
To assign a function to a key:
(1) Click to select the desired key in the Key Function column at the left side of the
page.
(2) Click to select a function in Function area. You can see the available functions
selected at the right side.
(3) Click [Save] to complete function setting.
12-6 Setup
Item
To set the cine memory splitting type.
To set if to display the iScape ruler on iScape
imaging mode.
[System Preset]
[System Preset]
[System Preset]
Description
[Application].Through the page, you can
[OB]".Through the page, you can set
[Key Config]".