Table of Contents
Advertisement
DICOM storage preset items are described as follows:
Name
Maximum Retries
Configure
Compression Mode
New
Service
Compression Ratio
Allow Multiframe
Max Frame Rate
SR Storage Option
Service List
Tips: RLE, JPEG and JPEG2000 are not supported by all SCPs. Please refer to the electronic file
DICOM CONFORMANCE STATEMENT of the SCP to check whether SCP supports or not. Do not
select these compression modes if the storage server doesn't support them.
11-4 DICOM
After you set the server (s) in DICOM Preset screen, the
Device
name (s) will appear in the drop-down list, select the name of
the storage server.
Service Name
Default is xxx-Storage, user-changeable.
Application Entity title, here, it should be consistent with that
AE Title
of the storage server.
DICOM communication port, 104 is default. Here, the port
Port
should be consistent with that of the storage server port.
Set the maximum retries.
Interval Time(s)
Interval time that the system retries a connection.
Refers to the amount of time after which the system will stop
Timeout
trying to establish a connection to the service.
Select the compression mode: uncompressed, RLE, JPEG,
and JPEG2000.
Select the JPEG compression ratio: lossless, low, medium,
and high.
Color Mode
Select the color mode.
If SCP supports this function, then select it.
Set the frame range of transferring cin file into DCM multi-
frame file.
To enable or disenable structured reporting sending.
Add
Add the DICOM service to the service list.
Cancel
Click to cancel parameter setting.
Select an item in the service list, change the parameters in
Update
the above area, and click [Update] to update the item in the
service list.
Delete
Click to delete the selected service in the service list.
Select an item in the service list, click [Default] and you can
Default
see "Y" in the Default column.
Click to verify if the two DICOM application entities are
Verify
normally connected.
Description
Advertisement
Table of Contents
