Table of Contents
Advertisement
The frame mark
image. In the statuses rather than the dual live, you can only review images in the
currently active window.
6.5
Image Compare
6.5.1
Cine Compare
1. Press <Review> to enter Review screen, press <Ctrl>+<Set> to select files to be
compared.
Tip: for B/B+COLOR/B+TVI/B+POWER/B+TEI mode image, you can select at most
4 images; for PW/M/CW/TVD mode image, you can select at most 2 images.
2. Click [Compare] to enter image compare mode.
3. Review the images of different image windows (cine replaying can't be performed for
single-frame image file), press <Dual> key or <Quad> key to switch the active image
window.
The window with the highlighted "M" mark is the current activated window.
Press <Cursor> and double click the image in the thumbnail area on the right side of
the screen to change the current active window
4. Save the image if it is necessary.
5. Click [Return] on the screen or press <Freeze> to exit image compare.
Image compare of different exams for the same patient:
(1) Select different exams in iStation screen, select [Review] in the popped up menu
to enter Review screen.
(2) In Review screen, click [History] to select the exam; click to select the image to be
compared in different exams, and click [Image Compare].
6.5.2
Frame Compare
1. Freeze the image in B/C mode, tap [Frame Compare] to enter the windows of
different frames. Besides, you can double click the cine file in the thumbnail area to
go for same cine different images compare.
The two windows display the same image when initially enter into image compare.
2. Roll the trackball or rotate the multifunctional knob to review the images; switch the
window by pressing <Update>.
3. Adjust the image parameters or do other operations (like image zoom in/zoom out,
image saving, comment) if necessary.
4. Click [Frame Compare] again to return to freeze mode; press <Freeze> or click
[Return] to go to image scanning.
Tips: image compare only can be performed on single-format B/C mode images only.
6.6
Cine Saving
Live capture
Live capture refers to saving the images or cines in image scanning status; after the
storage, the system continues image scanning.
6-6 Display & Cine Review
on the time mark of M/PW image indicates the corresponding 2D
Advertisement
Table of Contents
