Table of Contents
Advertisement
(3) Click to select "DICOM" in the Target box on the left side, and then select the DICOM
storage server in the Storage Server box on the right side.
(4) Click [OK] to start the sending.
(5) Tap [Send To] on the touch screen.
To send images by shortcut key
You can save single frame image or multi-frame images to DICOM server while saving to hard
drive by shortcut key. Procedures are described as follows:
(1) Define the key:
a) Open Key Config page via "[Setup] (F10) [System Preset]
b) Assign functions to the desired keys: in Key Config page, select a free key or
footswitch at the left side, then select the corresponding key on the right side.
Save Image to Hard Disk and Send to DICOM Storage
Save Cine (Retrospective) to Hard Disk and Send to DICOM Storage.
Save Cine (Prospective) to Hard Disk and Send to DICOM Storage.
c) Click [Save] to confirm the preset and exit.
(2) Set a default storage server:
a) Enter the DICOM Service Preset screen via "[Setup] (F10)
DICOM Service]".
b) Select a storage server in the Service List and click [Default]; you can see "Y" is
marked in the Default column.
c) Click [Exit] to exit the page and return to Setup menu, then click [Save] on the Setup
menu to make the preset to take effect.
(3) Press the key to send DICOM storage.
[Key Config]".
[DICOM Preset]
[Set
DICOM 11-9
Advertisement
Table of Contents
