Mindray DC-40 Operator's Manual page 192

Name
Film Orientation
Display Format
Medium Type
Configuration Info
Min Density
Max Density
Destination
Magnification Type
Service
List
11-6 DICOM
Select between LANDSCAPE and PORTRAIT.
Priority Specify printing task priority among HIGH, MED and LOW.
Select film size among the selections listed in the drop down
Film Size
list.
Specify quantity of printed files, e.g. STANDARD\2, 3 indicates
6 images are printed for each page.
Specify print medium: Paper, Clear Film, Blue Film; select Blue
Film or Clear Film for black and white printing; select Paper for
color printing.
Specify whether you want a trim box to be printed around each
Trim
image on the film: Yes or No.
Enter configuration information in the field.
Enter the minimum density of the film.
Enter the maximum density of the film.
Specify where the file is exposed: MAGAZINE (stored in the
magazine), or, PROCESSOR (exposed in the processor).
Select how the printer magnifies an image to fit the film.
Replicate: interpolated pixels belong to duplicate of adjacent
pixels);
Bilinear: interpolated pixels are generated from bilinear
interpolations between adjacent pixels;
Cubic: interpolated pixels are generated from cubic
interpolations between adjacent pixels;
None: without interpolation.
Add Add the DICOM service to the service list
Cancel Click to cancel parameter preset.
Select an item in the service list, change the parameters in the
Update above area, and click [Update] to update the item in the service
list.
Delete Click to delete the selected service in the service list.
Select an item in the service list, click [Default] and you can see
Default
"Y" in the Default column.
Click to verify if the two DICOM application entities are normally
Verify
connected.
Description