Configuring Settings Using Engineering Tool - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.1

Configuring Settings Using Engineering Tool

This section shows the procedure to configure the settings using an engineering tool.
Addition of a profile
When using any of the following versions of GX Works3, the profile of a BACnet module needs to be registered manually.
• 1.032J
• 1.033K
For the information on how to obtain the profile of BACnet module, please consult your local Mitsubishi representative.
Startup method
Operating procedure
Select [MELSOFT]  [GX Works3]
*1 Select [All apps] in the Start screen or [Start]  [All Programs]/[All apps].
*2 Does not appear in Windows 8 or later.
Parameter setting
Operating procedure
1.
Create a new project.
Select [Project]  [New] from the menu.
2.
Set "Series", "Type", and "Program Language", and click the [OK] button.
3.
Click the [Setting Change] button to set to use module labels.
4.
The "Add New Module" screen appears.
Navigation window  [Parameter]  right-click [Module Information]  [Add New Module]
4 PROCEDURES BEFORE OPERATION
24
4.1 Configuring Settings Using Engineering Tool
*2
 [GX Works3] from Windows

*1
Start .