Clear Data - GE Power Quality Meter Series Instruction Manual

4 PROGRAMMING
]] SETPOINTS
]] S1 PQM SETUP
] PREFERENCES
]
] CALCULATION
] PARAMETERS
MESSAGE
MESSAGE

] CLEAR DATA

]
Figure 4–8: SETPOINTS PAGE 1 – PQM SETUP / CLEAR DATA
CLEAR ENERGY VALUES: Enter YES to clear all the energy used data under the actual values subgroup
•
A1 METERING \ ENERGY. The TIME OF LAST RESET date under the same subgroup is updated to the current
date upon issuing this command.
• CLEAR MAX DEMAND VALUES: Enter YES to clear all the max power and current demand data under
the actual values subgroup A1 METERING \ DEMAND. The time and date associated with each message will
be updated to the current date upon issuing this command.
GE Power Management
SETPOINT
]] SETPOINTS
]] S2 SYSTEM SETUP
MESSAGE
CLEAR ENERGY
VALUES: NO
CLEAR MAX DEMAND
VALUES: NO
CLEAR ALL DEMAND
VALUES: NO
CLEAR MIN/MAX
CURRENT VALUES: NO
CLEAR MIN/MAX
VOLTAGE VALUES: NO
CLEAR MIN/MAX
POWER VALUES: NO
CLEAR MIN/MAX
FREQUENCY VALUES: NO
CLEAR MAX THD
VALUES: NO
CLEAR PULSE INPUT
VALUES: NO
CLEAR EVENT RECORD:
NO
LOAD FACTORY DEFAULT
SETPOINTS: NO
PQM Power Quality Meter
4.2 S1 PQM SETUP
4.2.8 CLEAR DATA
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
Range: YES, NO
4
4-11