GE Power Quality Meter Series Instruction Manual page 55

3 OPERATION
THREE PHASE REAL
POWER = 1000 kW
ACTUAL VALUE OR SETPOINT
T O B E R E M O V E D F R O M T H E
D E F A U L T M E S S A G E Q U E U E
Each PQM is pre-programmed with five default messages as shown below. Note, each time the factory set-
points are reloaded the user programmed default messages are overwritten with these messages.
The PQM will scroll through the default messages in the sequence shown.
A= 100 B=
C= 100
THREE PHASE POWER
FACTOR =
FREQUENCY = 60.00 Hz
TIME: 12:00:00am
DATE: JAN 01 1996
Phone: 905-294-6222
GEindustrial.com/pm
GE Power Management
V A L I D D E F A U L T
STORE
M E S S A G E
RESET
TO DELETE THIS
MESSAGE PRESS STORE
D I S P L A Y E D F O R 3 S E C O N D S
W H E N S T O R E K E Y A N D R E S E T
K E Y A R E P R E S S E D I N S E Q U E N C E
N O T A D E F A U L T
M E S S A G E
NOT A SELECTED
DEFAULT MESSAGE
D I S P L A Y E D F O R 3 S E C O N D S W H E N
S T O R E K E Y A N D R E S E T K E Y A R E
P R E S S E D I N S E Q U E N C E
100
Location: ACTUAL VALUES A1 METERING\CURRENT
AMPS
Location: ACTUAL VALUES A1 METERING\POWER
0.99 LAG
Location: ACTUAL VALUES A1 METERING\FREQUENCY
Location: ACTUAL VALUES A1 METERING\CLOCK
L o c a t i o n : A C T U A L V A L U E S A 1 M E T E R I N G \ P R O G R A M M A B L E M E S S A G E
PQM Power Quality Meter
3.4 DEFAULT MESSAGES
STORE
DEFAULT MESSAGE
R E M O V E D
D I S P L A Y E D F O R 3 S E C O N D S
W H E N S T O R E K E Y P R E S S E D
R E D E F M S G . V S D
3
3-9