GE Power Quality Meter Series Instruction Manual page 88

4.3 S2 SYSTEM SETUP
• PULSE INPUT 1 VALUE: Enter a value in this setpoint that will be equivalent to 1 pulse input on the switch
input assigned to PULSE INPUT 1 (i.e. 1 pulse = 100 kWh). The accumulated value is displayed in actual
values under A1 METERING\PULSE INPUT COUNTERS\PULSE INPUT 1.
• PULSE INPUT 2 VALUE: Enter a value in this setpoint that will be equivalent to 1 pulse input on the switch
input assigned to PULSE INPUT 2 (i.e. 1 pulse = 100 kWh). The accumulated value is displayed in actual
values under A1 METERING\PULSE INPUT COUNTERS\PULSE INPUT 2.
• PULSE INPUT 3 VALUE: Enter a value in this setpoint that will be equivalent to 1 pulse input on the switch
input assigned to PULSE INPUT 3 (i.e. 1 pulse = 100 kWh). The accumulated value is displayed in actual
values under A1 METERING\PULSE INPUT COUNTERS\PULSE INPUT 3.
• PULSE INPUT 4 VALUE: Enter a value in this setpoint that will be equivalent to 1 pulse input on the switch
input assigned to PULSE INPUT 4 (i.e. 1 pulse = 100 kWh). The accumulated value is displayed in actual
values under A1 METERING\PULSE INPUT COUNTERS\PULSE INPUT 4.
• PULSE INPUT TOTAL: This setpoint allows the user to define which pulse inputs are to added together.
For example, if the selection is this setpoint is 1+2+3, the PULSE INPUT 1, PULSE INPUT 2 and PULSE
INPUT 3 values shown in A1 METERING \ PULSE COUNTERS \ PULSE INPUT 1/2/3/4 will be added together and
displayed in A1:METERING \ PULSE INPUT COUNTERS \ PULSE IN 1+2+3.
4
4-32 PQM Power Quality Meter
4 PROGRAMMING
GE Power Management