Loading New Firmware Into The Pqm - GE Power Quality Meter Series Instruction Manual

6.4 UPGRADING FIRMWARE
1. Select the Communication > Upgrade Firmware menu item.
2. A warning window will appear. Select Yes to proceed or No the abort the process. Do not proceed unless
you have saved the current setpoints as shown in Section 6.4.2: SAVE/PRINT PQM SETPOINTS TO A
FILE above.
3. Locate the file to load into the PQM. The firmware filename has the following format:
65 C 350 C4 . 000
6
4. Select the required file and click on OK to proceed or Cancel to abort the firmware upgrade.
6-8

6.4.3 LOADING NEW FIRMWARE INTO THE PQM

Modification number (000 = none)
For GE Power Management use only
Product firmware revision (e.g. 350 = 3.50). This number
must be larger than the current number of the PQM. This
number is found in actual values page A4 under SOFTWARE
VERSIONS \ MAIN PROGRAM VERSION
Required product hardware revision. This letter must match
the first character of the serial number located on the PQM
product label (on the back of the unit)
Product Name (65 = PQM)
PQM Power Quality Meter
6 SOFTWARE
.
GE Power Management