GE Power Quality Meter Series Instruction Manual page 146

5.5 A4 PRODUCT INFO 5 MONITORING
SUPERVISOR PROGRAM VERSION: This identifies the firmware installed internally in the supervisor (power
fail) processor of the PQM. This does not affect the functionality of the PQM.
b) MODEL INFORMATION
Product identification information is contained in these messages.
ORDER CODE: This indicates which features were ordered with this PQM. T = Transducer option (T20=4-20
mA, T1=0-1 mA Analog Outputs), C = Control option, A = Power Analysis option.
MOD NUMBER(S): If unique features have been installed for special customer orders, the MOD NUMBER will
be used by factory personnel to identify the matching product records. If an exact replacement model is
required, the MAIN PROGRAM VERSION, MOD NUMBER, ORDER CODE, SERIAL NUNBER should be specified with the
order.
SERIAL NUMBER: This is the serial number of the PQM. This should match the number on the label located
on the back of the PQM.
DATE OF MANUFACTURE: This is the date the PQM was final tested at GE Power Management.
DATE OF CALIBRATION: This is the date the PQM was last calibrated.
5
5-32 PQM Power Quality Meter GE Power Management