Programming
Initial Configuration and Programming
Setting Up Simple Day/Night Answering
After you set up DILs to IntraMail, Call Routing Mailbox 1 answers outside calls. This is because:
■
All trunks by default are assigned to Answer Table 1.
■
Answer Table 1, which runs Monday-Friday from 8:30AM to 5:00PM, uses Call Routing Mailbox 1.
■
The Default Mailbox, which runs at all other times (evenings and weekends), also uses Call Routing
Mailbox 1.
To set up simple Day/Night Answering:
■
In 47-11-03: Default Mailbox Category on page 225 and 47-11-03: Default Mailbox Number on
page 225, change the Default Mailbox for Answer Table 1 to 2.
■
From the System Administrator Mailbox:
- Dial SA + I and record a new Instruction Menu message for Call Routing Mailbox 1.
- Dial SA + I and record a new Instruction Menu message for Call Routing Mailbox 2.
■
The Instruction Menu message for Call Routing Mailbox 1 will play to callers Monday through Friday
from 8:30AM to 5:00PM.
■
The Instruction Menu message for Call Routing Mailbox 2 will play to callers on evenings and weekends.
■
Review Automated Attendant on page 47 for more on how to customize the Automated Attendant.
IntraMail System Requirements
■
Aspire S System Software version 02.51. or higher.
Specifications
P/N 0892176
P/N 0892178
Mailboxes:
12 ◆ Chapter 1: Quick Setup
Aspire IntraMail Part Numbers and Capacities
Aspire IntraMail 4 Port/4 Hour Kit
Includes:
■
(1) P/N 0891003 DSPDBU (IntraMail PCB)
■
(1) P/N 0892175 4 Port/4 Hour CompactFlash Card
with software.
■
(1) 0893820 Aspire IntraMail Literature Kit
Aspire IntraMail 8 Port/8 Hour Kit
Includes:
■
(1) P/N 0891003 DSPDBU (IntraMail PCB)
■
(1) P/N 0892177 8 Port/8 Hour CompactFlash Card
with software.
■
(1) 0893820 Aspire IntraMail Literature Kit
Station Mailboxes = 128
Routing Mailboxes = 16
Master Mailboxes = 16
Total Mailboxes = 160
IntraMail for Aspire System Guide