Screened Transfer (Page 154); Unscreened Transfer; Unscreened Transfer (Page 174) - NEC Aspire S IntraMail System Manual

Directory Dialing
Step 5
Step 6
Step 7
Step 8
Step 9
70 ◆ Chapter 2: Features
- Specify how many letters of an employee's name the caller must dial to use Directory Dial-
ing. If the caller dials less than the specified minimum number of letters, IntraMail cannot
route the call. The entries are 1-3 (1-3 letters).
✔
By default, callers must dial at least 1 letter of the employee's name (1).
When Directory Dialing finds a name match, should it route the call as a Screened or

Unscreened Transfer?

Unscreened Transfer
47-14-04: Unscreened or Screened Transfer on page 244.
5.1
- Enter 1 to route the call as an Unscreened Transfer.
✔
By default, IntraMail routes the call as a Screened Transfer (0).
Screened Transfer
47-14-04: Unscreened or Screened Transfer on page 244.
5.2
- Enter 0 to route the call as a Screened Transfer.
✔
By default, IntraMail routes the call as a Screened Transfer (0).
47-14-05: Screened Transfer Timeout on page 244.
5.3
- Set how long a Screened Transfer from the Directory Dialing Mailbox will ring an unan-
swered extension before recalling. The entries are 1-255 seconds or 0 for no recall.
✔
By default, the Screened Transfer Timeout interval is 15 seconds.
To change the amount of time Directory Dialing callers have to dial letters:
47-14-06: Time Limit for Dialing Commands on page 244.
6.1
- Enter the new timeout duration (0-99 seconds).
- If the caller waits too long to dial, the Directory Dialing Message repeats.
✔
By default, Directory Dialing callers have 5 seconds to dial letters.
To record a Directory Dialing Message:
See Operation below.
7.1
- The Directory Dialing Message is the Instruction Menu for the Master Mailbox pro-
grammed as a Directory Dialing Mailbox.
✔
By default (without a custom message recorded), the Directory Dialing Message is,
"Please enter one or more letters of the person's name, then press the pound key."
47-01-04: Non-Subscriber Message Length on page 194.
7.2
- This option sets the maximum message length (1-4095 seconds) for Instruction Menus.
✔
By default, this option is 120 seconds.
Enable or disable the ability of the Directory Dialing Mailbox to detect and route incoming
faxes.
47-14-07: Fax Detection on page 244.
8.1
- Enter 1Y to enable Fax Detection; 0 to disable. If enabled, when the Directory Dialing
Mailbox detects incoming fax CNG tone, it routes the call to the fax extension specified
in 47-01-06: Fax Extension.
- See Fax Detection on page 80 for more.
✔
By default, Fax Detection is disabled (N).
To allow the Directory Dialing Mailbox caller to dial 0 for other options or # to return to the
Automated Attendant:
47-14-08: Next Call Routing Mailbox on page 245.
9.1
- Assign a Next Call Routing Mailbox (1-16) to the Directory Dialing Mailbox.
- To remove an assignment, press CLEAR.
- Once assigned, dialing # returns to the Automated Attendant. Dialing 0 follows the 0 action
of the Next Call Routing Mailbox.
✔
By default, there is no Next Call Routing Mailbox assigned.
IntraMail for Aspire System Guide