47-15-08: Next Call Routing Mailbox; 47-14 Program Entry - NEC Aspire S IntraMail System Manual

Program 47: IntraMail
47-15: Routing Directory Dialing Mailbox Options

47-15-08: Next Call Routing Mailbox

(Next CR Mbox)
Use this option to specify the Next Call Routing Mailbox (1-16) for the Directory Dialing Mailbox. If a Next
Call Routing Mailbox is specified, the following will occur:
If the caller dials 0 while listening to the Directory Dialing Message, they route to the 0 action pro-
■
grammed into the Dial Action Table associated with the Next Call Routing Mailbox.
If the caller dials # while listening to the Directory Dialing Message, they route immediately to the
■
Next Call Routing Mailbox and listen to the recorded Instruction Menu Message for that mailbox.
See Directory Dialing on page 66 for more.
■
Options
Call Routing Mailbox Number (up to 2 digits)
■
No entry - 0 (Entered by pressing CLEAR)
■
Default
✔ No entry - 0
- By default, Call Routing Mailbox numbers are 1-8.

47-14 Program Entry

+ #*#* + Password (12345678) + HOLD + 4714 + Option.
CALL1
This selects the option chosen for Master Mailbox 1.
■
There are 16 available Master Mailboxes (1-16).
01
02
03
04
05
06
07
08
Press this:
Editing
HOLD
-1 +1
← ← ← ← → → → →
CONF
CLEAR
Line Keys (LK)
Navigation
FLASH
MSG or back
select
248 ◆ Chapter 3: Programming
47-15: Routing Directory Dialing Mailbox Options
(Entry Range) [Default Setting]
Min Num Letters (1-3) [1]
Directory List (1-8) [1]
Name Match (0=First portion of programmed name, 1=Second portion of programmed name) [0]
Transfer Option (0=Screened Transfer, 1=Unscreened Transfer) [0]
Scrn Trf Timeout (1-255 seconds, 0=No recall) [15]
Dialing Timeout (1-99 seconds, 0=No timeout) [5]
Fax Detection (0=Disabled, 1=Enabled) [0]
Next CR Mbox (1-16, 0-Entered by pressing CLEAR=Undefined) [0]
Enter (accept) data you entered and advance to the next prompt, or advance to the next
prompt without changing your entry.
Scroll backwards ( ) or forwards (
-1
When editing an entry, moves the cursor left or right.
When editing an entry, delete the character to the left of the cursor.
When editing an entry,
CLEAR
Where indicated, press a line key to enter a specific value for the selected option.
+ Mailbox number +
FLASH
Backs up to the previous level (e.g., from Option to Series, or from Series to Program).
Scroll consecutively backwards or forwards through selected Option or Series.
Selects currently displayed Option or Series
To do this:
) through the list of available entries.
+1
erases the entire entry from the display.
selects a new mailbox number
FLASH
IntraMail for Aspire System Guide