Time And Date - NEC Aspire S IntraMail System Manual

Time and Date

Time and Date
Description
Since IntraMail is completely integrated with the telephone system software, the IntraMail time and date is
the same as the phone system time and date. Since time and date is used on telephone displays and with the
Auto Time Stamp and Time and Date Stamp features, be sure to set it accurately. To change the time and date,
use the system programmable options. See Programming below. The Time and Date is retained if the tele-
phone system power should fail or the system resets.
In addition, a Subscriber Mailbox user can hear the time and date when they call their mailbox.
Related Features
Auto Time Stamp (page 46)
After a user listens to a message, IntraMail can optionally announce the time and date the message was left.
Time and Date Stamp (page 171)
An extension can listen to a message and dial TI to hear the time the message was sent.
Programming
Step 1
Step 2
Operation
Log onto Subscriber Mailbox.
(84) Access the Time and Date option.
TI
■ IntraMail plays the time and date, and then returns you to the mailbox Main Menu.
0 Plays Help message.
170 ◆ Chapter 2: Features
To set the system time and date from system programming:
10-01-01 : Time and Date
1.1
- Set the system Time and Date.
To set the system time from a system telephone:
(The date must be set in system program 10-01.)
- Press idle CALL key.
- Dial 828 .
- Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
- Dial two digits for the minutes (00-60).
- Press SPK to hang up.
Hearing the Current Time and Date
IntraMail for Aspire System Guide