Checking The Cpu Leds And Powering Down - NEC Aspire S IntraMail System Manual

Checking the CPU LEDs and Powering Down

Before powering down, you must check the CPU PCB LEDs.
Step 1
Carefully check the CPU LEDs
- Make sure that
(
- If any other LEDs on the CPU are flashing, wait until they stop.
- If you turn off the system while LEDs other than LD2 are flashing, system data could become
corrupted as the system powers down.
Step 2
Turn the power switch to OFF.
IntraMail for Aspire System Guide
is the only LED flashing on the CPU.
LD2
flashes green 1/2 second on and 1/2 second off.)
LD2
LD1
LD3
LD4
LD2
Figure 3: Checking the CPU LEDs
Installing the IntraMail PCB
(Figure 3: Checking the CPU LEDs)
Installation
.
Chapter 1: Quick Setup ◆ 3
1