Powering Up And Checking The Leds - NEC Aspire S IntraMail System Manual

Powering Up and Checking the LEDs

Step 1
Power up the system.
- Remove the grounded wrist strap.
- Turn the cabinet power switch to
Step 2
Check the CPU LEDs
- Wait about 10 seconds, then verify the CPU LEDs.
- Make sure that
(LD2 flashes green 1/2 second on and 1/2 second off.)
IntraMail for Aspire System Guide
.
On
(Figure 7: Checking the CPU LEDs)
LD2 is the only LED flashing on the CPU.
LD1
LD3
LD4
LD2
Figure 7: Checking the CPU LEDs
Installing the IntraMail PCB
.
Chapter 1: Quick Setup ◆ 7
Installation
1