Time And Date Stamp; Time And Date Stamp With Caller Id - NEC Aspire S IntraMail System Manual

Time and Date Stamp

Description
While listening to a message, a Subscriber Mailbox user can dial
was left. This is a handy option while reviewing messages. The subscriber can just dial a code to find out
when the message arrived.

Time and Date Stamp with Caller ID

With caller ID installed, a mailbox user can dial
was sent, as well as the caller's number.
Related Features
Auto Time Stamp (page 46)
After a user listens to a message, IntraMail can optionally announce the time and date the message was left.
Caller ID (page 57)
With Caller ID installed and programmed, the Time and Date Stamp also includes the caller's number.
Listening to Messages (page 104)
Turn to this feature for additional listening options.
Time and Date (page 170)
You can set the system time from system programming or from a system extension. You can set the date only
from system programming.
Programming
To get Time and Date Stamp with Caller ID, be sure Caller ID is properly installed and programmed in the
connected telephone system.
Operation
Log onto Subscriber Mailbox.
(5) Access the Message Listen mode.
L
[Listen] - [Lstn]
TI (84)
0 Plays Help message
IntraMail for Aspire System Guide
Hearing the Time and Date a Message was Left
Hear the time and date the message was sent.
■ Turn to Listening to Messages on page 104 for more on your listening options.
Time and Date Stamp
TI to hear the Time and Date the message
while listening to a message to hear the time the message
TI
Chapter 2: Features ◆ 171
2