47-02-08: Message Waiting Lamp; 47-02-09: Auto Attendant Do Not Disturb; 47-02-10: Forced Unscreened Transfer; 47-02-11: Auto Time Stamp - NEC Aspire S IntraMail System Manual

Table of Contents

Advertisement

Program 47: IntraMail
47-02: IntraMail Station Mailbox Options
The Aspire telephone system software provides an additional Conversation Record beep. This beep repeats
according to the setting of Program 45-01-06: Voice Mail Integration Options: Record Alert Tone Inter-
val Time (0-64800 seconds). To disable the Aspire telephone system Conversation Record beep, enter 0 for
this option.
See Conversation Record on page 60 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
✔ 1 (Yes - enabled)

47-02-08: Message Waiting Lamp

(Update MW Lamp)
Use this option to enable or disable Message Waiting lamping at the extension associated with the Sub-
scriber mailbox. For Subscriber Mailboxes, you should leave this option enabled. For Guest Mailboxes, you
should leave this option disabled.
See Guest Mailbox on page 96 for more.
Disabling this option will also disable Message Notification. See Message Notification on page 127
for more.
See Message Waiting Lamp on page 138 for more.
See Subscriber Mailbox on page 162 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
✔ 1 (Yes - enabled)

47-02-09: Auto Attendant Do Not Disturb

(Auto-ATT DND)
Use this option to enable or disable Auto Attendant Do Not Disturb. When a subscriber enables Auto Atten-
dant Do Not Disturb, an Automated Attendant caller will route directly to the mailbox, hear the greeting, and
be asked to leave a message. A subscriber can also enable Auto Attendant Do Not Disturb while recording
their mailbox greeting.
See Auto Attendant Do Not Disturb on page 42 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)

47-02-10: Forced Unscreened Transfer

(Forced UTRF)
Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant occur normally.
See Forced Unscreened Transfer on page 85 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
✔ 0 (No - disabled)

47-02-11: Auto Time Stamp

(Auto Time Stamp)
Use this option to enable or disable Auto Time Stamp for the Subscriber Mailbox. If enabled, after the sub-
202 ◆ Chapter 3: Programming
IntraMail for Aspire System Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents