Upgrading The Intramail Pcb - NEC Aspire S IntraMail System Manual

Installation
Installing the IntraMail PCB

Upgrading the IntraMail PCB

The IntraMail software is integrated into the telephone system software. The IntraMail voice prompts (and
messages) are stored on the CompactFlash card that plugs into the IntraMail PCB. You will never have to do
a separate upgrade to get new IntraMail features, but you may need to upgrade the voice prompts stored on
the CompactFlash card to activate those new features.
Step 1
- You should never remove the IntraMail CompactFlash card with the system powered up.
Step 2
- Be sure to take adequate static precautions.
- Slide out the CompactFlash card as shown below.
Step 3
- Refer to Using the IntraMail Utility (P/N 80054INS**) for instructions on how to upgrade the
Step 4
6 ◆ Chapter 1: Quick Setup
Be sure the system is powered down.
Slide out the CompactFlash card
Figure 6: Removing the IntraMail CompactFlash Card
Use the IntraMail Utility to upgrade the CompactFlash card.
CompactFlash card.
Reinstall the CompactFlash card and power up the system.
(Figure 6: Removing the IntraMail CompactFlash Card)
IntraMail for Aspire System Guide
.