Fax Detection - NEC Aspire S IntraMail System Manual

Fax Detection

Fax Detection
Description
The Automated Attendant can detect incoming fax calls and transfer them to a fax machine. With Fax Detec-
tion enabled, after the Automated Attendant answers a call it listens for incoming fax CNG tone. If it detects
the tone, it does an unscreened transfer of the call to the specified company fax machine. The incoming fax
then prints out on the company fax machine. If you disable Fax Detection, the Automated Attendant will not
detect and route incoming fax calls.
Related Features
None
Programming
Step 1
Step 2
Operation
N/A
80 ◆ Chapter 2: Features
Enable Fax Detection for the active Call Routing Mailbox.
47-08-04: Fax Detection on page 220.
1.1
- Enter 1 (Yes) to enable Fax Detection for the Call Routing Mailbox.
✔
By default, this option is 0 (No).
Specify the extension to which IntraMail should send a fax call when the Automated Atten-
dant detects fax CNG tone.
47-01-06: Fax Extension on page 195.
2.1
- Normally, this is the extension number of the analog port to which the fax machine is con-
nected.
✔
By default, this option is undefined (entered by pressing CLEAR ).
IntraMail for Aspire System Guide