Go To A Mailbox (Page 87) - NEC Aspire S IntraMail System Manual

Go To A Mailbox
Programming
Step 1
Operation
For the outside caller:
1. After Automated Attendant answers, the voice prompts will instruct you on which digits to dial.
88 ◆ Chapter 2: Features
Assign a GOTO action to the active Dial Action Table.
47-13-01: Dial Action Table Actions: GOTO Action - Go to Mailbox (7) on page 238.
1.1
- To have Automated Attendant callers dial a single digit to go to a Call Routing or
Announcement Mailbox, enter the mailbox number in the corresponding Number option.
- For example, to have key 1 go to Call Routing Mailbox 2, for key 1 enter GOTO for
the Action and 2 for the corresponding Number.
- To have IntraMail require Automated Attendant callers to enter a Call Routing or
Announcement Mailbox to go to, enter XXX in the corresponding Number option. The key
you choose must represent the first digit in the mailbox numbers.
- For example, to allow callers to go to mailboxes 1-16, for key 0 enter GOTO for the
Action and XXX for the corresponding Number.
- To log into any valid Call Routing or Subscriber Mailbox, enter IXXX in the correspond-
ing Number option.
- For example, to allow callers to dial 1 plus any Call Routing or Announcement Mail-
box number to go to, for key 1 enter GOTO for the Action and IXXX for the corre-
sponding Number.
✔
By default, there are no GOTO actions assigned.
Using the Automated Attendant GOTO Action
IntraMail for Aspire System Guide