ILX Lightwave LDX-3200 Series User Manual page 87

POINTS OF
INTEREST Constant I mode (low bandwidth) enables the output low bandpass filter.
EXAMPLES "LAS:MODE:ILBW" -action: sets the laser output for constant I mode (low bandwidth).
n Front Panel
n Remote
The LASer:MODE:MDP command selects laser constant power mode.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST This mode of laser operation requires the laser's monitor PD feedback to maintain constant
optical power or constant monitor current.
In this mode, the displayed parameter will be either I
> 0) in mW.
EXAMPLES "LAS:MODE:MDP" -action: sets the laser output mode of operation to constant optical power
mode.
n Front Panel
n Remote
The LASer:OUTput command turns the laser output on or off.
SYNTAX DIAGRAM
:
PARAMETERS An <nrf value>; 1 = on, 0 = off.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
:
LAS
PAGE 42
LASer:MODE:MDP
P
:
MODE
MDP
(if CALMD = 0) in µA, or P
PD
LASer:OUTput
<white
<nrf
OUT
space>
value>
(if CALMD
PD
CHPT 4