Ldx-3200 Series Device-Dependent Commands - ILX Lightwave LDX-3200 Series User Manual

LDX-3200 SERIES DEVICE-DEPENDENT COMMANDS

This section contains all of the device-dependent commands for the LDX-3200 Series Precision Current Source, listed
in alphabetical order. Sub-sections for each path are presented, listing the commands which are legal for that path.
See Figure 3.1 for command path tree structure.
Command
Required letters are shown in
upper case; lower case letters
are optional.
Front Panel/
Remote Execution
A solid box means the command
can be executed in that mode.
Command mnemonics in front
panel (local) mode may vary.
Command Description
Syntax Diagram
(For Remote Commands)
Parameters
Tells what parameters are
expected, and their type.
An <nrf value> refers to a
flexible numeric notation
(IEEE-488.2). Integer,
exponential, or floating point
may be used with the decimal
radix. Alternate radices may be
selected in remote operation.
Points of Interest
Has special information
about the command.
Examples
Shows typical statements
using the command.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Front Panel
Remote
The LASer:LIMit:I1 command sets the laser current
limit value.
SYNTAX DIAGRAM
:
:
An <nrf value> that represents the LASER limit
PARAMETERS
current, in mA.
POINTS OF The current limit is in effect in all modes of
INTEREST operation of the laser output.
In local operation, the limit current is entered
by selecting the LIM I parameter, pressing and
holding in the (PARAMETER) SET switch,
adjusting the ADJUST knob until the desired value
is displayed, and then releasing the SET switch.
EXAMPLES
"Las:Lim:I1 100" - action: the LASER current limit
is set to 100.0 mA.
"LAS:LIM:I1 50" - action: the LASER current limit
is set to 50.0 mA.
Figure 4.1 Command Description Format
PAGE 4
LASer:LIMit:I
LAS : LIM
<white
< nrf
I1
space>
value >
1
CHPT 4