ILX Lightwave LDX-3200 Series User Manual page 34

For further clarity in programming, the (Boolean) values of one (1) and zero (0) may be used or their names
as indicated in the following table.
If multiple parameters are expected, they should be separated with commas, as in:
LAS:INC 100,50
A query has no space between the mnemonic and the question mark, as in:
LAS:LDI?
The LDX-3200 Series Precision Current Source uses a terminator of <NL><^END> (new line with EOI). For users
whose GPIB driver defaults expect a carriage return in the terminator, <CR><NL><^END>, the "TERM" command may
be used for convenience (see "TERM" command, Chapter 4). For more information, refer to your GPIB driver
configuration manual.
The command structure is illustrated in Figure 3.1. Table 4.1 lists all of the LDX-3200 Series Precision Current Source's
device-dependent commands, with the full path shown for each command and a brief explanation of its usage.
OPERATING IN REMOTE CONTROL
CHPT 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SUBSTITUTE NAME
ON
OFF
OLD
NEW
TRUE
FALSE
SET
RESET
Table 3.1 Substitute Parameter Names
PAGE 3
VALUE
1
0
1
0
1
0
1
0