ILX Lightwave LDX-3200 Series User Manual page 71

PARAMETERS An <nrf value> whose sum represents the enabled bits:
1 - LASER Current Limit
2 - LASER Voltage Limit
4 - N/A
8 - Power Limit (With Output On)
16 - N/A
32 - N/A
64 - N/A
128 - N/A
POINTS OF
INTEREST The enabled LASER outoff bits can be read by using the LASer:ENABle:OUTOFF? query.
The enable registers normally retain their values at power-up (as they were at power-down)
unless the power-on status clear flag is set true (for more information see the *PSC definition, in
the IEEE488.2 specification).
The factory default value for this register is #B0000100000001000, or #H808, or 2056 decimal.
EXAMPLES "LAS:ENAB:OUTOFF 9" -action: enables the LASER status outoff register so that Power limit
and LASER current limit conditions will cause the LASER output to be turned off.
"Las:Enab:Outoff #HE0B" -action: enables the LASER status outoff register so that any or all
of the above conditions will cause the LASER output to be turned off.
¨ Front Panel
n Remote
The LASer:ENABle:OUTOFF? query returns the value of the status outoff enable register of the LASER
operations.
SYNTAX DIAGRAM
:
*
Warning: If this bit is enabled with the output off, the output may never turn on.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
LAS ENAB
PAGE 26
256 - N/A
512 - Output is Out of Tolerance
1024 – N/A
2048 – N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
LASer:ENABle:OUTOFF?
:
OUTOFF
*
?
CHPT 4